Welcome to our websites!

The use of dewatering machine

For users who have just bought a dewatering machine, they will pay more attention to the method of using the dewatering machine, as well as the problems that should be noted during use.

This is the way to install the dewatering machine.

Before installation, check whether the components are in good condition and whether the thread ends are damaged. The machine must be installed on a stable ground and needs to be fixed with anchor bolts.

During the installation process, you need to use a level detection to check dewatering machine.

There is the use method of dehydrator.First, before using, check whether the parts of the equipment are in good condition.

Then put the material to be dehydrated in the barrel. At this time, pay attention to keeping the barrel evenly horizontal.

Then twist the button to start the motor.After the time is up, the drum will stop by itself, and then the materials can be taken out.

 There are the precautions for the use of the dewatering machine.

If it vibrates strongly, the material may be placed unevenly, and the power should be turned off immediately and the material should be placed again.

The quantity of materials should match the capacity of the machine, and be careful not to overload.

When the equipment is running, never put your hands into the barrel.


Post time: Aug-03-2020